Home / Products / Fiber Optic Instruments / 915FS Optical Fusion Splicer

915FS Optical Fusion Splicer

Cat No: 915FS

Contact Sales

915FS Optical Fusion Splicer
  • Active clad alignment
  • Intuitive user interface
  • Uses the Tempo splice on connector
  • 200 splice’s on one battery charge including the 60mm splice protector shrink cycle
  • Automatic and manual modes
  • 60 preset / user defined profiles
  • IP52 ingress rating
  • 3-year warranty
ModelDescription
915FS
Active Clad Splicer
915FS-KIT1
Splicer & Cleaver Kit (915FS & 915CL)
915FS-KIT2
Contractor's Kit (915FS, 915CL, PA1171 & Extra Battery)
Attribute Name Attribute Value
Applicable Fibers SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657); EDF
Fiber Cleaved Length 10mm
Cladding Diameter 100 to 1000µm
Fiber Count Single
Fiber Aligning Method Active Clad
Splice Loss (Typical) 0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB (NZDS & BIF)
Splicing Mode 60 Preset / User Definable Modes
Splice Time 7 seconds
Boot Time 5 seconds
Number of Splices Per Battery Charge 200 (including 60mm heat shrink cycle)
Splice Connector SC, LC, FC, ST
Arc Calibration Mode Automatic & Manual
Protection Sleeve Length 60mm, 40mm, Micro Sleeves
Ingress Protection IP5X (Dust); IPX2 (Water)
Storage of Splice Results 5,000 Results, 100 screenshots
Drop Test 76cm on five axis
Tension Test 2N
Fiber Display Magnification 200x
Tube Heating Time 18 seconds
Attenuator Mode 0.1 to 15 dB
Electrode Life 5,000 Splices
Display 3.5" Color, Turn-Over LCD
Connectivity USB
Storage Temperature -40 to +158F (-40 to +70C)
Operating Conditions Pressure: 0 to 16,404 feet (0 to 5,000 meters) above Sea Level Humidity: 0 to 95% Temperature: -4 to +131F (-20 to +55C)
Power Supply 100 to 240V AC Adapter; Li-ion Battery (4400 mAh)
Weight 3.3lbs (1.5kg)
Dimensions 4.9" x 4.9" x 5.3" (125 x 125 x 135mm)
Password Protection Yes

en English
en Englishfr Frenchde Germanit Italianpt Portuguesees Spanish