TV220 CableScout Time-Domain Reflectometer (TDR)

Tempo Report Writer: Software Update
High Voltage Tolerant: Will not be damaged by high voltages (up to 400V (DC + peak AC).
High Bandwidth: Tests more of your system capacity enabling users to pinpoint the faults that can cause micro-reflections which can be damaging to digital transmissions.
High SNR: The TV220 also has extremely high signal-to-noise ratio (SNR). Proprietary circuit design and software reduce the noise level so that bumps on the trace represent real faults, not just noise. Events previously difficult or impossible to find, are clearly visible with the TV220. This means that you can clearly see faults further away.
High-resolution performance allows the TV220 to locate problem components in the customer drop. The TV220 uses a pulse width of only 1ns, which means the operator can identify multiple events that are less than 2ft apart. This enables the technician to tell which of two components on a cable is causing the problem, even when they are close together. This is particularly important in troubleshooting drops, because components such as splitters and ground blocks can be closely spaced.
TestWizard Testing: The most innovative feature in the TV220 is TestWizard automated testing and event marking. Now, instead of meticulously setting up the TDR and then carefully interpreting the meaning of the displayed waveform, you push one button to get a high-resolution, low-noise trace, with the events clearly marked. This means substantial savings in training time and reduced time to get accurate, repeatable measurements.
Return Loss Measurements
Multiple Event Marking
Pinpoint the faults that can cause micro-reflections which can be damaging to digital transmissions.
Locate problem components in the customer drop.
Can identify multiple events that are less than 2ft apart.
Easier-to-use GUI interface requires little or no training
Improved clarity and trace functionality makes it even easier to identify faults on-screen and determine noise versus the fault.
clearly see faults further away.
Even higher SNR and Resolution makes it easier to identify events that were previously difficult or impossible to find
Zero dead zone at the launch allows the user to see faults immediately
Improved trace update rate allows you to see changes to the fault faster (5 times/sec. versus 2 times/sec.)
Lighter weight and longer charge life with the new lithium-ion battery
Rugged enough to withstand a 2 meter drop
The TDR for Digital Broadband Coax, finds faults other Cable Testers can't
TestWizard Testing - One-Button testing
High-Resolution, short Pulse width (1ns)
CE compliant
Rugged enough to withstand a 2 meter drop
Large, backlit, high-resolution display (640 X 440), 7.2" diagonal
Internal memory for 20 waveforms.
USB port for waveform access, using the Greenlee Record Manager software.
Long lasting, lightweight Lithium Ion battery

Title
TV220_DataSheet.pdf
TV220_Spec_Sheet.pdf

Attribute Name	Attribute Value
Application	For CATV And Digital Broadband Coax Applications
Test Signal	1/2 sine, unbalanced
Amplitude	6 V into 75 ohm, typical
Output Impedance	75 ohm
Pulse Widths	1 ns, 5 ns, and 25 ns
Maximum Range	3657 m (12,000 ft), depending on cable type and condition
Resolution	0.17 ft minimum on 640 x 480 pixel high-resolution LCD
Gain	0 to 90 dB, in 3 dB steps
Input Protection	±400 (VDC + peak AC) to maximum of 440 Hz, 30 second duration
Waveform Storage	Up to 20 waveforms
Return Loss	Automatic at cursor
Interface	USB Port
Battery	10.8 V, 2.4 Ah, lithium-ion
Battery Operation	8 hours minimum continuous operation, without backlight
Non-Operating Temperature	-20 °C to 60 °C (-4°F to 140 °F)
Operating Temperature	-10 °C to 40 °C (11 °F to 104 °F)
Durability	Shock/Vibration/Drop, Drip proof
Dimensions	9 cm x 25 cm x 30 cm (3.5' x 10' x 12'), nominal
Weight	2.3 kg (5.1 lb), nominal
Standard	EN61326-1:2006 Electrical Equipment for Measurement Control and Laboratory Use-EMC Requirements, Part 1: General Requirements. IEC61010-1:2001(2nd Edition); EN61010-1:2001(2nd Edition) - Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use - Part 1. CISPR 11:2009+A1:2010/ EN 55011:2009+A1:2010, Class A, Group 1, Industrial, Scientific and Medical Equipment. FCC Part 15, Subpart B, Class A - Unintentional Radiators for Use in Commercial and Industrial Areas. Installation Category Designation: